| |
 | This heavy duty device consists of a double jacketed 5-quart kettle for melting compounds. $1,695.75 |
|  | An invaluable tool for anyone working with paper insulated lead cable $290.70 |
|
 | This 15 in. (381 mm) L lead float has a rounded file for smoothing concave areas, and a flat one for planes. $52.01 |
|  | Bundled in 6-lot packages, these 1-1/4 in. (32 mm) dia. x 3-1/2 in. (89 mm) L candles are the easiest way for you to apply stearic acid flux to lead cable. $11.88 |
|
 | A thermal handle shield isolates heat inside the cup from your hand, and keeps your thumb from slipping. $58.90 |
|  | This dipper is built from tough 20 gauge steel, with a rolled bead around its top and pouring lip on either side. $57.00 |
|
 | Used for cleaning and preparing lead cable sheath and sleeves for soldering and wiping joints $35.63 |
|  | Used for cleaning files and preparing cable for soldering or bonding. $9.69 |
|
 | Used for cleaning files and preparing cable for soldering or bonding. $25.65 |
|  | A more modern version of the high density wooden dresser, this cable dresser is manufactured from ultra-high molecular polyethylene. This weighted, durable product is ideal for forming and dressing lead cable. $90.25 |
|
 | Manufactured in 6 in (48 fl. oz/20 lb. cap.) and 8 in. (72 fl. oz/30 lb. cap) dia. sizes from high-grade gray cast iron, these pots are designed to hold their heat. $137.75 |
|  | Manufactured in 6 in (48 fl. oz/20 lb. cap.) and 8 in. (72 fl. oz/30 lb. cap) dia. sizes from high-grade gray cast iron, these pots are designed to hold their heat. $142.50 |
|
 | The furnace is used to heat materials used in splicing operations. $321.10 |
|  | Utility Propane Furnace Base Riser (to make it compatible with GMP Four Panel Windshield P/N 70121) $62.70 |
|
 | Ideal for carrying paraffin or solder pots to and from work sites, hanging pots from aerial cable, or suspending them from handline hooks. $51.30 |
|  | This UL listed all-brass unit works with torches and furnaces during heating operations. $222.30 |
|
 | Perfect for keeping wind away from lead sheath cable installation work materials, this shield features a welded steel grate and supporting brackets, providing broad support for large solder melting pots and kettles $570.00 |
|  | This heavyweight sheet steel pan is made for catching solder drippings when wiping joints in cable splicing operations. $151.05 |
|
 | The C gauge has a 4 in. (100 mm) dial , graduated in 0.05 psi increments, and delivers highly reliable measurements ±1/2 % full scale reading (0-12 psi). $387.60 |
|  | These drills let you make clean cable holes for placing flanges in 1 in. (25.4 mm) dia. or larger paper or pulp insulated lead or plastic sheath cable. $83.60 |
|
 | These drills let you make clean cable holes for placing flanges in 1 in. (25.4 mm) dia. or larger paper or pulp insulated lead or plastic sheath cable. $78.66 |
|  | The funnel-shaped well in this aluminum can makes it easy to economically apply our Soap Solution while keeping your working area clean. $49.40 |
|
 | Bell System Cable-Sheath Chipping/Splitting Knife is a heavy-duty knife used for splitting cable sheaths. $43.70 |
|  | This brass-framed 3 in. x 3 in. heavy plate glass mirror lets you see the back side of the connection so you can easily make thorough checks on cable splices or wiped joints. $10.69 |
|
 | This safe, easy-to-use drying agent helps get rid of excess moisture in splices, cable ends and splicing materials. Our Desiccant is a moisture-absorbing material which resembles sand in consistency. It is ideal for use with plastic and paper insulated cable. It's packaged in sealed, screw-top, moisture-proof cans. $8.88 |
|  | This safe, easy-to-use drying agent helps get rid of excess moisture in splices, cable ends and splicing materials. Our Desiccant is a moisture-absorbing material which resembles sand in consistency. It is ideal for use with plastic and paper insulated cable. It's packaged in sealed, screw-top, moisture-proof cans. $12.35 |
|