AERIAL CABLE BLOCKS, ROLLERS & CABLE BENDERS

UNIVERSAL STRINGING BLOCKS
These rugged universal blocks feature high strength and low weight at a value price.
1 INCH ECONO NYLON ROLLER CABLE BLOCK
1 slap-on overlash cable roller. Affordable and rugged. Supports cable diameters up to 1 including fiber optic cables during cable pullout.
1 INCH ECONO DUAL NYLON ROLLER CABLE BLOCK

Available this spring, 2021

This 1 inch Econo Dual Nylon Roller cable block supports fiber optic cables during cable pullout. Designed to prevent cables from catching or snagging.
3 INCH ECONO RUBBER ROLLER CABLE BLOCK

Available this spring, 2021

This 3 inch rubber roller cable block supports fiber optic cables during cable pullout. Designed to prevent cables from catching or snagging.
GMP CLIP-ON CABLE BLOCKS - PKG OF 10
This tempered spring steel block is used to support cable up to 1" during cable pull-out.
GMP CABLE BLOCK 10700 W/ALUM ROLLER
This economical block has an aluminum roller & is used for new build on bare strand & overlash work.
GMP CABLE BLOCK 10701 W/RUBBER ROLLER
This economical block has a rubber roller & is used for new build on bare strand & overlash work.
GMP B CABLE BLOCK
This affordable block is used for new construction or overlash.
LEMCO L0790P OVERLASH BLOCK WITH NYLON ROLLER
This lightweight block is used to support up to 1 diameter cable during pull-out.
GMP CABLE BLOCK 73305
This block is used to support one cable up to 1" on 1/4" bare strand.
GMP CABLE BLOCK 75000
A block used on 1/4" bare strand when lashing cable up to 2-3/4".
Lemco Cable Puller/ PR-965
This Puller is used to pull out cable prior to the lashing operation.
GMP D AERIAL CABLE BLOCK
A heavy-duty block used during new strand lashing.
GMP F AERIAL CABLE BLOCK
Heavy-duty block to be used on either new strand or when overlashing.
GMP OVERLASH ROLLER 4"
Simple & effective, this block handles cable or bundles up to 4".
GMP 2.75 in. Overlash Roller
Simple and effective, this block handles cable or bundles up to 2.75 in.
LEMCO CABLE BLOCK 4 ROLLER L-381-4
This block can support multiple cables during new construction.
GMP H CABLE BLOCK
Used to pull cable toward or away from corner poles or other locations where a single block is required.
GMP POLE MOUNT BLOCK
This block is used to support cable at the pole using a 5/8" suspension bolt or 3-bolt clamp.
GMP HANGER BRACKET
Used for hanging cable blocks at the pole as temporary support.
Lemco M-3206 Loop Forming Tool (2) .750"
Coaxial Cable Bender for up to two (2) cables with a maximum diameter of .75".
LEMCO M-3195 LOOP FORMING TOOL 2 (1")
Loop forming tool for up to two (2) cables with a maximum diameter of 1".
GMP CABLE BLOCK PUSHER 24"
Positioned between the lasher and first block for spacing that is especially needed when lashing multiple cables.
If you require next day air, order before 12 pm EST, and we ship the same day. All regular freight orders will ship the next day. Speak to a Craftworktools customer service representative toll-free at 1-877-511-0677 (M-F 8:00 am to 5:00 pm Eastern time).



  California residents:
WARNING: Cancer and reproductive harm See www.P65Warnings.ca.gov for more information.