ROPE CONNECTORS
Rope to Rope Connector
This connector is used to connect two ropes of up to 7/8 in. (22 mm) diameter.
Rated @ 15,000 lbs. (6804 kg) max. load, this connector is made entirely from Stainless Steel. Available only in the one size since it can also be used for smaller rope sizes.
Safety factor for load is 3:1 (horizontal pull only).
Rope to Swivel Connectors
These Rope to Swivel Connectors achieve in two products what others do in four. These Stainless Steel connectors maximize usefulness by catering to the same rope capacity and using different ends to attach to the most popular swivel sizes. The sheaves run on clevis pins which are also available as spares.
Safety factor for load is 3:1 (horizontal pull only).
1/2 in. Connector Rated @ 7,000 lbs. (6804 kg) max load
21/32 in. Connector Rated @ 15,000 lbs. (3175 kg) max load
This connector is used to connect two ropes of up to 7/8 in. (22 mm) diameter.
Rated @ 15,000 lbs. (6804 kg) max. load, this connector is made entirely from Stainless Steel. Available only in the one size since it can also be used for smaller rope sizes.
Safety factor for load is 3:1 (horizontal pull only).
Rope to Swivel Connectors
These Rope to Swivel Connectors achieve in two products what others do in four. These Stainless Steel connectors maximize usefulness by catering to the same rope capacity and using different ends to attach to the most popular swivel sizes. The sheaves run on clevis pins which are also available as spares.
Safety factor for load is 3:1 (horizontal pull only).
1/2 in. Connector Rated @ 7,000 lbs. (6804 kg) max load
21/32 in. Connector Rated @ 15,000 lbs. (3175 kg) max load
Speak to a Craftworktools customer service representative
toll-free at 1-877-511-0677
(M-F 8:00 am to 5:00 pm Eastern time)
(M-F 8:00 am to 5:00 pm Eastern time)
