Measuring Devices

STRAND TENSIONMETER/DYNAMOMETER
Commonly referred to as a Strand Dynamometer, the Strand Tensionmeter is used in tensioning new strand and in measuring the tension in existing strand. Assures that utilities maintain proper cable clearances to comply with all requirements specified in the National Electric Safety Code's Uniform System of Clearances.
$2,500.00
70046
GMP C PULL FINDER
A Bell System specified tool for determining the pull in feet on corner poles.
$57.00
84850
GMP PROTRACTOR PULL FINDER
Used to calculate the "break" or deflection angle in utility pole lines
$95.00
01190
GMP GUY RULE
The Guy Rule is used to determine the sizes of guys required at corners and deadends in a pole line
$50.00
87281
LUFKIN MEASURING WHEEL 12.5" DIAMETER MW38TP
The most popular measuring wheel in use by engineers & craft personnel 12.5" diameter rugged molded wheel in high visibility orange with telescoping aluminum handle
$95.00
87164
GMP C PRESSURE TESTING GAUGE FOR MEASURING COMMUNICATIONS CABLE PRESSURE
The C gauge has a 4 in. (100 mm) dial , graduated in 0.05 psi increments, and delivers highly reliable measurements ±1/2 % full scale reading (0-12 psi).
$349.00
77170
Lufkin 1/2" x 100' Hi-Viz® Orange Linear Fiberglass Tape Model 706L
Hi-impact, blaze orange ABS case contains durable 1/2" x 100' fiberglass tape encapsulated in flexible plastic
$24.00
87187
Speak to a Craftworktools customer service representative toll-free at 1-877-511-0677
(M-F 8:00 am to 5:00 pm Eastern time)